Outdoor Series

FEATURES

  1. All our outdoor products are guaranteed IP65 rating, high brightness & contrast.
  2. Special and beautiful design of Die-cast aluminum cabinet with special, adjustable lock, the precision is less than 0.1mm
  3. Special louver design allows outdoor daytime use & improves contrast without sacrifice viewing angle,and ideal solution for any indoor/outdoor applications.
  4. Most advanced surface mount technology, the location & amount of paste are controlled and monitored by the machine, the nonconforming paste printing will be  ticked out before going to the next process, so the overall yield-rate are higher.
  5. Standaring manufacturing process,ensure stability and consistency of the products.
  6. Highest quality of PCBA material is used and all the PCB’s are heat treated for minimum 24hours before mounting of the SMD Led’s.
FS-2.5 FS-3.0 FS-4.0 FS-5.0 FS-6.0
Type of LED Display System Semi-Outdoor Outdoor Outdoor Outdoor Outdoor
Material of the Cabinet Die-Cast Aluminium
Aspect Ratio 16:9
LED Configuration 3-in-1 SMD
Pixel Pitch (mm) 2.5 3 4 5 6
Contrast Ratio 8000:1
Pixel Density * (pix/㎡) 160,000 112,896 60,000 40,000 27,776
Horizontal Viewing Angle (degree) 140 140 160 160 160
Vertical Viewing Angle (degree) 140 140 160 160 160
Colour Depth 16 Bit 16 Bit 16 Bit 16 Bit 16 Bit
Refresh Rate (Hz) ≥1920Hz ≥1920Hz ≥1920Hz ≥1920Hz ≥1920Hz
Response Time < 6 milliseconds
Frame Frequency (Hz) >50-60 Hz
Brightness** ≥ 3500 cd/㎡ ≥ 4500 cd/㎡ ≥ 5000 cd/㎡  ≥ 5000 cd/㎡ ≥ 5500 cd/㎡
Life of Light Source (Hours) ≥1,00,000 ≥80,000 ≥50,000 ≥50,000 ≥50,000
IP Rating (Front/Rear) IP 30/45 IP 65/54 IP 65/65 IP 65/65 IP 65/65
Maintenance Front/Rear
Duty Cycle 24/7
Power Input (Volt) AC   200~260V AC   220~240V
Maximum Power Consumption (Watt)* 800 W/㎡ 900W/㎡ 850W/㎡ 850W/㎡ 850W/㎡
Mounting Arrangement Wall Mount/Floor Mount/ Ceiling Mount/ Pole Mount/ Stand Mount
Operating Temperature (degree) 0℃~50℃
Operating Humidity (%RH) 10~90%RH
Note:
  1. Provided value is per square meter
  2. Parameters are calibrated
  3. Cabinets used are designed and tested as per IS-13252 (Part-1):2010
  4. Considering continuous upgradation of product above mentioned parameters may change anytime.